After Sales
Technical Documentation
RAE/RAK–1N
CARK60 Installation Guide
Page 6
Original, 08/96
Unpacking
Carefully unpack the equipment and ensure that the following items are
present.
Charging Holder MBR–1
Junction Box (to be mounted with MKE–1) HFJ–3
Mounting Plate (w/12 screws, 4 nuts, 4 washers) MKE–1
Swivel Mounting Plate (incl. mounting plates & screws) MKR–1
Flat Mouning Kit (incl. mounting plates & screws) MKK–1
Hands–Free Microphone HFM–10
Hands–Free Speaker (w/2 screws) HFS–6
Power Cable (w/2 fused connectors & wire ends) PCH–4
PCH–4
MBR–1
HSU–1
(optional)
MOBILE
ANTENNA
(optional)
MKR–1
MKE–1
HFJ–3
HFS–6
HFM–10
DLR–1
(optional)
Communicator
not included
Fi
ure 1. CARK60 Kit and options
Component Parts
Charging Holder MBR–1
The Charging Holder unit offers your Communicator an external antenna
connection, hands–free function, and firm attachment to the vehicle. The
installation of the Holder can be done in two different ways: either 1) using
Swivel (adjustable angles) or 2) using Flat Mounting Kit (fixed position).
Mounting Plate MKE–1, Flat Mounting Kit MKK–1 and Swivel MKR–1
The Mounting Plate is used to mount the Hands–Free Junction Box.
Screw the Mounting Plate to the appropriate place and slide on to the
Junction Box.
To Next Page
Loading...