Nokia Alcatel-Lucent OXO Connect Series - 8.8 AP Interface Module; 8.8.1 Hardware description; 8.8.1.1 Overview; 8.8.1.2 Compliant Standards

9
8.8 AP Interface Module
8.8.1 Hardware description
8.8.1.1 Overview
The AP Interface Module (Analog Peripheral) allows an analog device such as fax, modem, minitel,
answering machine to be connected to the OXO Connect via a UA link.
AP Interface Module
Digital Link
Digital Link
PCX
UAI Board
(or MIX Board)
Digital Set
to Mains
Fax
Figure 8.11: Example of Configuration with an AP Interface Module
AP Interface Module can be used alone or combined with Digital Premium DeskPhones.
AP Interface Module powers the analog device (DTMF signalling, ringer) and, to do this, requires an
external power supply (230V AC/30V AC adapter). In this document, this set is called Z set.
8.8.1.2 Compliant Standards
8.8.1.2.1 Safety Requirements
• EN60950: European requirements
• UL 1950: US requirements
• CAN/CSA-C22.2 No 950-95: Canada
8.8.1.2.2 ECM
• EN55022: Limits and methods of measurement of radio interference characteristics of information
technology equipment
• EN55024: Limits and methods of measurement of immunity characteristics of information
technology equipment
• FCC part15: US requirements
8.8.1.2.3 Analog Transmission
• ETS 300 439: Business TeleCommunications (BTC); Transmission characteristics of digital Private
Branch eXchanges (PBXs)
Chapter
8
Device commissioning
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual 146/216