If successfully connected, a list of available line extensions on the OXO Connect is presented.
If unsuccessful, the invitation to enter the correct IP Address for the OXO Connect is presented.
4. Select the line to control and enter the voice mailbox password for that line extension, click Next
5. The configuration wizard will now authenticate the line and password with the OXO Connect
6. When successful, click Finish to complete the setup.
If unsuccessful, the invitation to select a line and enter the correct password is displayed.
7. The configuration Wizard can be launched at any moment from windows menu:
Start > All Programs > Alcatel-Lucent > My IC Plugin for Outlook
8. Once the installation is completed, start Outlook, My IC Plugin for Outlook
®
panel will appear within
Outlook interface on the right as native Outlook windows
Note:
Please ensure that TAPI configuration is setup by checking the "Location", "Area Code" and "Dialling Rules" in the
TAPI control panel. Please refer to Phone and Modem Options on page 186 for more details.
Note:
It is not advisable to do the installation of My IC Plugin for Outlook
®
on a PC while connected to the published
location via a VPN. Use the LAN connection to the OXO Connect
8.15.1.5.2 Software Uninstall
My IC Plugin for Outlook
®
can be uninstalled using standard Windows conventions from Control Panel.
The uninstall process does NOT remove any user configuration.
Uninstalling My IC Plugin for Outlook
®
will not uninstall the Alcatel-Lucent TAPI Service Provider
or .NET Framework and will not impact PIMphony.
8.15.1.5.3 Software Update
My IC Plugin for Outlook
®
can be updated simply by installing a new software version. The installer will
automatically remove the old version and install the new one without impacting any of the user
information or installed applications.
Chapter
8
Device commissioning
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual 183/216
To Next Page
Loading...