Nokia Alcatel-Lucent OXO Connect Series - 4.2.1.8 LanX-2 Board; 4.2.1.9 APA Board; 4.2.2 Types of Cable to Use

• NETW: connection to the public network (TNL).
• PBX: use in private network with TX and RX twisted pairs.
4.2.1.8 LanX-2 Board
RJ45 pin 1 2 3 4 5 6 7 8
Ports 1 to 14 RX+ RX- TX+ TX-
GE1, GE2 TR0+ TR0- TR1+ TR2+ TR2- TR1- TR3+ TR3-
• Ports 1 to 14: 10/100 BT ports.
• GE1, GE2: 10/100/1000 BT ports.
4.2.1.9 APA Board
RJ45 pin 1 2 3 4 5 6 7 8
Output 1 ZSETB ZSETA LB-Ring LA-Tip ZB ZA
Outputs 2 to 8 LB-Ring LA-Tip
• 1 : connection of network line 1, SLI interface and callback terminal
• 2 to 8: connection of other analog trunk lines
4.2.2 Types of Cable to Use
Access Type Impedance
Digital, Z, T0, LR UTP, FTP or STP, Category 3 or 5 100 or 120 ohms
T2 UTP, FTP or STP, Category 3 or 5 120 Ohms
T1 UTP, FTP or STP, Category 3 or 5 120 Ohms
Ethernet FTP or STP, Category 5 100 Ohms
HSL STP supplied with the product, Category 5 100 Ohms
• UTP: Unshielded Twisted Pairs
• FTP: Foiled Twisted Pairs
• STP: Shielded Twisted Pairs
Chapter
4
Powering and connecting the PBX to the customer LAN
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual 43/216