6.1.4.1 Configuration of the OXO Connect DHCP server for IP devices
Tue Feb 28 2013
DHCP
Status : Enable
DHCP4
Scroll
down
Scroll up
Tue Feb 28 2013
DHCP
Status : Enable
DHCP1
DHCP2
DHCP3
Disable
The following softkeys are available:
• Disable or Enable: Disabling or enabling OXO Connect DHCP server for IP devices provided by
ALE International (enabled by default)
• DHCP1: See Defining the IP address range for DHCP1 on page 76
• DHCP2: Defining the IP address range for DHCP2
• DHCP3: Defining the IP address range for DHCP3
• DHCP4: Defining the IP address range for DHCP4
Other fixed keys of the set:
• Back: Return to the previous menu (IP configuration on page 75)
• Exit: Return to home page
6.1.4.1.1 Defining the IP address range for DHCP1
Tue Feb 28 2013
DHCP1
StartIP EndIP
Note:
The available softkeys are the same for DHCP2, DHCP3, and DHCP4
The following softkeys are available:
• StartIP: See StartIP on page 77
• EndIP: See EndIP on page 77
Other fixed keys of the set:
Chapter
6
Starting the configuration
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual 76/216
To Next Page
Loading...