Configure a Gateway 3 (G-240W-E)
108
Nokia WiFi Gateway 3 Product Guide
3FE-47464-AAAA-TCZZA Issue: 01
Procedure 35 UPnP and DLNA configuration
1 Select Application > UPnP and DLNA from the top-level menu in the Ethernet Gateway
window, as shown in Figure 43.
Figure 43 UPnP and DLNA window
2 Select the Enable UPnP check box to enable UPnP.
3 Click Save/Apply.
4 STOP. This procedure is complete.
8.1.6 Maintenance
The Gateway 3 (G-240W-E) supports maintenance tasks, including:
• Password change
• Device Management
• Backup and Restore
• Firmware Upgrade
• Device Reboot
• Restore Factory Defaults
• Diagnostics
• View Logs