Nokia WiFi Gateway 3 Product Guide Configure a Gateway 3 (G-240W-E)
Issue: 01 3FE-47464-AAAA-TCZZA 77
2 Configure a specific WAN connection.
3 Click Save.
4 STOP. This procedure is complete.
Enable/Disable Select this checkbox to enable the WAN connection
NAT Select this checkbox to enable NAT
Service Select the checkboxes to enable service types for this connection
Enable VLAN Select this checkbox to enable VLAN
VLAN ID Enter the VLAN ID
VLAN PRI Enter the VLAN PRI
WAN IP Mode Choose an IP mode from the drop-down menu
Connection Trigger Choose the trigger type from the drop-down menu
Username Enter the Username provided by your ISP
Password Enter the Password provided by your ISP
Keep Alive Time Enter the keep alive time (5 to 60 seconds)
Keep Alive Retry Enter the number of keep alive time retries (1 to 10 times)
Echo Value The echo value: the keep alive time value multiplied by the number of retries
Manual DNS Enter a DNS
Field Description
(2 of 2)
To Next Page
Loading...
Need help?
General
