Nokia N80 - Write Text

Messaging
40
Copyright © 2007 Nokia. All rights reserved.
Tip! When you have opened any of the default
folders, to switch between the folders, press
or .
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select Options >
Service command in the main view of Messag..
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions, from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select Options > Cell
broadcast. In the main view, you can see the status of a
topic, a topic number, name, and whether it has been
flagged ( ) for follow-up.
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.
Write text
ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.
Traditional text input
is displayed when you write text using traditional
text input.
• Press a number key ( — ) repeatedly until the
desired character appears. There are more characters
available for a number key than are printed on the key.
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
• To insert a space, press . To move the cursor to the
next line, press three times.
Predictive text input
You can enter any letter with a single keypress.
Predictive text input is based on a built-in dictionary to
which you can add new words. is displayed when
you write text using predictive text input.
1 To activate predictive text input, press , and select
Predictive text on. This activates predictive text input
for all editors in the device.
9253189_N80_en_apac.book Page 40 Tuesday, September 25, 2007 10:09 AM