Connectivity
84
Copyright © 2007 Nokia. All rights reserved.
Do not pair with an unknown device.
Send data using Bluetooth
connectivity
Several Bluetooth connections can be active at a time.
For example, if you are connected to a compatible
headset, you can also transfer files to another compatible
device at the same time.
Bluetooth connectivity indicators
• When is shown in the standby mode, Bluetooth
connectivity is on.
• When is blinking, your device is trying to connect
with another device.
• When is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity,
open Notes, write the text, and select Options >
Send > Via Bluetooth.
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2 Select the item and Options > Send > Via Bluetooth.
Devices with Bluetooth wireless technology within
range start to appear on the display.
Device icons: computer, phone, audio or
video device, and other device.
To interrupt the search, select Stop.
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See “Pair devices”, p. 84.
5 When the connection has been established, Sending
data is shown.
The Sent folder in Messag. does not store messages sent
using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address).
To find the unique address of your device, enter the
code *#2820# in the standby mode.
Pair devices
To open the paired devices view ( ), in the Bluetooth
application main view, press .
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select Options > New paired device.
Devices with Bluetooth wireless technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
9253189_N80_en_apac.book Page 84 Tuesday, September 25, 2007 10:09 AM
To Next Page
Loading...
