Make calls
58
Copyright © 2007 Nokia. All rights reserved.
1 To start voice dialing, in the standby mode, press and 
hold the right selection key. If you are using a 
compatible headset with the headset key, press and 
hold the headset key to start voice dialing.
2 A short tone is played, and Speak now is displayed. 
Say clearly the name or nickname that is saved on the 
contact card.
3 The device plays a synthesized voice tag for the 
recognized contact in the selected device language, 
and displays the name and number. After a timeout of 
2.5 seconds, the device dials the number. 
If the recognized contact was not correct, select Next 
to view a list of other matches, or Quit to cancel voice 
dialing.
If several numbers are saved under the name, the device 
selects the default number, if it has been set. Otherwise 
the device selects the first available number of the 
following: Mobile, Mobile (home), Mobile (business), 
Telephone, Tel. (home), and Tel. (business).
Video calls
When you make a video call (network service), you can see 
a real-time, two-way video between you and the recipient 
of the call. The live video image, or video image captured 
by the camera in your device is shown to the video call 
recipient. 
To be able to make a video call, you must have a USIM card 
and be in the coverage of a UMTS network. For availability 
of and subscription to video call services, contact your 
network operator or service provider.
A video call can only be made between two parties. 
The video call can be made to a compatible mobile device 
or an ISDN client. Video calls cannot be made while 
another voice, video, or data call is active.
Icons: 
 You are not receiving video (the recipient is not 
sending video or the network is not transmitting it). 
 You have denied video sending from your device. 
To send a still image instead, see “Call settings”, p. 98.
Even if you denied video sending during a video call, the 
call is still charged as a video call. Check the pricing with 
your network operator or service provider.
1 To start a video call, enter 
the phone number in the 
standby mode, or select 
Contacts and a contact.
2 Select Options > Video 
call.
Starting a video call may 
take a while. Waiting for 
video image is shown. If the 
call is not successful (for 
9253189_N80_en_apac.book  Page 58  Tuesday, September 25, 2007  10:09 AM