Nokia N80 - Add Ringing Tones for Contacts; Create Contact Groups

Contacts (Phonebook)
55
Copyright © 2007 Nokia. All rights reserved.
number and the recipient’s phone number must be
included on the fixed dialing list.
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.
Add ringing tones for contacts
When a contact or group member calls you, the device plays
the chosen ringing tone (if the caller’s telephone number is
sent with the call and your device recognizes it).
1 Press to open a contact card or go to the groups list,
and select a contact group.
2 Select Options > Ringing tone. A list of ringing tones
opens.
3 Select the ringing tone you want to use for the
individual contact or the selected group.
You can also use a video clip as a ringing tone.
To remove the ringing tone, select Default tone from the
list of ringing tones.
Create contact groups
1 In Contacts, press to open the groups list.
2 Select Options > New group.
3 Write a name for the group or use the default name
Group , and select OK.
4 Open the group, and select Options > Add members.
5 Scroll to a contact, and press to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6 Select OK to add the contacts to the group.
To rename a group, select Options > Rename, enter the
new name, and select OK.
Remove members from a group
1 In the groups list, open the group you want to modify.
2 Scroll to the contact, and select Options > Remove
from group.
3 Select Yes to remove the contact from the group.
Tip! To check to which groups a contact belongs,
scroll to the contact, and select Options > Belongs
to groups.
9253189_N80_en_apac.book Page 55 Tuesday, September 25, 2007 10:09 AM