Set up your e-mail with the
mailbox guide
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. To start setting up
the e-mail account with the mailbox guide, select Yes.
1. To start entering the e-mail settings, select Start.
2. In Mailbox type, select IMAP4 or POP3, and select
Next.
Tip: POP3 is a version of the post office
protocol that is used to store and retrieve
e-mail or Internet mail messages. IMAP4 is
a version of the Internet message access
protocol that lets you access and manage
e-mail messages while the messages are
still on the e-mail server. You can then
choose which messages to download to
your device.
3. In My e-mail address, enter your e-mail address. To
insert the@ sign or other special characters, press
*. To insert a full stop, press 1. Select Next.
4. In Incoming mail serv., enter the name of the
remote server that receives your e-mail, and
select Next.
5. In Outgoing mail serv., enter the name of the remote
server that sends your e-mail, and select Next.
6. In Access point, select the Internet access point your
device should use when it retrieves the e-mails. If
you select Always ask, each time the device starts to
retrieve e-mail, it asks which Internet access point
it should use, but if you select an access point, the
device makes the connection automatically. Select
Next.
7. Enter a name for your new mailbox, and select
Finish.
When you create a new mailbox, the name you give to
the mailbox replaces Mailbox in the Messag. main view.
You can have up to six mailboxes.
Connect to mailbox
E-mail addressed to you is not automatically received
by your device, but by your remote mailbox. To read
your e-mail, you must first connect to the remote
mailbox; then select the e-mails you wish to retrieve
into your device. To receive and send e-mail, you need
to register for an e-mail service. To set up a mailbox in
your device, select Messag. > Options > Settings > E-
mail > Mailboxes > Options > New mailbox. Contact
your service provider for the correct settings.
To retr ie ve receive d e-mail messag es to your dev ic e and
view them offline, select your mailbox in the Messag.
main view. When the device asks Connect to mailbox?
select Yes.
To view e-mail messages in a folder, scroll to the folder,
and press the joystick. Scroll to a message, and press
the joystick.
To retrieve e-mail messages to your device, select
Options > Retrieve e-mail > New to retrieve new
messages that you have neither read or retrieved,
Selected to retrieve only messages you have select from
the remote mailbox, or All to retrieve all messages not
previously retrieved.
43
Messages
file:///C:/USERS/MODEServer/rapi/2290550/rm-49_mars/en/issue_2/rm-49_mars_en_2.xml Page 43 14.11.2005 13:44:58file:///C:/USERS/MODEServer/rapi/2290550/rm-49_mars/en/issue_2/rm-49_mars_en_2.xml Page 43 14.11.2005 13:44:58
To Next Page
Loading...
