Nokia RM-49 User Manual

• Left selection key, Right selection key — Change the
shortcuts that open from the left and right selection
keys in the standby screen. Press joystick, select a
function from the list, and OK.
• Navigation key right, Navigation key left, Navigat.
key down, Navigation key up, Selection
key — Change the shortcuts that open when you
scroll to different directions. Press the joystick, select
a function from the list, and OK. These settings are
not available if you select Active standby > On.
Display settings
Select Display, and define the following:
• Light sensor — Adjust the amount of light required
to illuminate the device display. Press joystick, scroll
right or left, and select OK.
• Power saver time-out — Select the amount of time
before the screen saver is activated. Press the
joystick, scroll right or left, and select OK.
• {No display_text mapping for
'qtn_backlight_time_out', locale='en'} — Set how
quickly after last keypress the display dims. Press the
joystick, scroll right or left, and select OK.
Call settings
Select Call settings, and define the following:
• Send my caller ID — Select Yes to display your phone
number to the person you are calling or Set by
network to let the network to determine whether
your caller ID is sent.
• Send my Int. call ID — Set this feature on if you want
to display your Internet caller ID to the person you
are calling.
• Call waiting — Select Activate to be notified of a new
incoming call while you have a call in progress, or
Check status to check if the function is active on the
network.
• Internet call waiting — Activate this feature to be
notified of a new incoming call while you have an
internet call in progress.
• Default call type — Select Cellular to make normal
calls to the phone number or Internet to use VoIP to
call the number or address.
• Reject call with SMS — Select Yes to send a text
message automatically to the person who is calling
you informing why you cannot answer their
incoming call.
• Message text — Enter the text that is sent when you
cannot answer an incoming call and want to
automatically send a text message as a reply.
• Image in video call — Select Use selected to select a
still image to be displayed instead of a video during
a video call or None to not send any image during a
video call.
• Automatic redial — Select On to redial a number if it
was busy at the first call attempt. Your device makes
a maximum of 10 attempts to connect the call.
• Summary after call — Select On to briefly display the
approximate duration of the last call.
• Speed dialling — Select On to activate speed dialing
on your device. Dial a phone number assigned to the
speed dialling keys (2 -9) by pressing and holding the
key.
See "Speed dial," p. 24.
85
Settings
file:///C:/USERS/MODEServer/rapi/2290550/rm-49_mars/en/issue_2/rm-49_mars_en_2.xml Page 85 14.11.2005 13:44:58file:///C:/USERS/MODEServer/rapi/2290550/rm-49_mars/en/issue_2/rm-49_mars_en_2.xml Page 85 14.11.2005 13:44:58

Nokia RM-49 Specifications

General

Brand	Nokia
Model	RM-49
Category	Cell Phone
Language	English