Settings
Select Menu > Tools > Settings.
You can define and modify various settings of your
device. Modifying these settings affects the operation
of your device across several applications.
Some settings may be preset for the device or sent to
you in a configuration message by your network
operator or service provider. You may not be able to
change such settings.
Scroll to the setting that you want to edit, and press the
joystick to do the following:
• Switch between two values, such as on or off.
• Select a value from a list.
• Open a text editor to enter a value.
• Open a slider to decrease or increase the value by
scrolling left or right.
Phone settings
Select Phone sett. to change the language settings,
standby mode settings, and display settings of your
device.
General settings
Select General, and define the following:
• Phone language — Select a language from the list,
and OK. Changing the device language affects every
application in your phone, and remains in effect until
you change the device language again.
• Writing language — Select a language from the list,
and OK. Changing the writing language also affects
the characters that are available when writing text
and the predictive text dictionary that is used. This
change remains in effect until you change the device
language again.
• Predictive text — Select On to use predictive text
input. The predictive text dictionary is not available
for all languages.
• Welcome note / logo — Select Default to use the
default image, Text to enter a welcome note of your
own, or Image to select an image from the Gallery.
The welcome note or image is displayed briefly each
time you switch on the device.
• Orig. phone settings — Restore the original device
settings. To do this, you need your device lock code.
Enter the device lock code, and select OK. After
resetting, the device may take a longer time to
power on. Documents, contact information,
calendar entries, and files are unaffected.
Standby mode settings
Select Standby mode, and define the following:
• Active standby — Select On to have shortcuts to
different applications available in the active standby
mode.
84
Settings
file:///C:/USERS/MODEServer/rapi/2290550/rm-49_mars/en/issue_2/rm-49_mars_en_2.xml Page 84 14.11.2005 13:44:58
To Next Page
Loading...
