Seamless roaming
Select Menu > Tools > Settings > Connection >
Access point groups.
Your device allows seamless roaming between wireless
access technologies, such as WLAN and GPRS, for e-mail,
Web browsing and other applications that require data
connectivity. For example, you can start an e-mail
session at home, and continue the session on your way
to work. While your session continues, uninterrupted,
your handheld device switches from WLAN to GPRS and
back to WLAN when you arrive at your workplace.
Access point groups
To create an access point group, select Access point
groups > Options > New group. In the Group name
field, enter a name for the group. Define in the Conn.
switching field whether to show the connection
switching process on the display of your device. Choose
and edit the access points that belong to this group in
the Access points section.
Cable connection
Install the USB data cable driver to your PC before you
use a cable connection.
Select Menu > Connect. > Data cbl..
Using a USB data cable, you can connect your device to
a compatible PC . Connect the USB data cable to the
bottom of the device.
To change the device type you normally connect to your
phone with the data cable, press the joystick.
Select from the following:
• Ask on connection — Select whether you want to be
asked for the device type every time you connect the
data cable to your phone.
• PC Suite — Connect the PC Suite to your device with
the data cable, or to use your device as a modem.
• Data transfer — Access and transfer data such as
music or image files from your computer to your
phone memory card using the data cable
connection. The device will switch into the Offline
mode if this is selected. End the connection from the
PC to avoid damaging the memory card.
• IP passthrough — Select an access point through
which to transfer data using the Internet protocol.
To save your selection, select Back.
Bluetooth
There may be restrictions on using Bluetooth
technology in some locations. Check with your local
authorities or service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduces the battery life.
This device is compliant with Bluetooth Specification
1.2 supporting the following profiles: Generic Access
Profile, Serial Port Profile, Dial-up Networking Profile,
Headset Profile, Handsfree Profile, Generic Object
Exchange Profile, Object Push Profile, File Transfer
Profile, SIM Access Profile, and Basic Imaging Profile. To
ensure interoperability between other devices
54
Connectivity
file:///C:/USERS/MODEServer/rapi/2290550/rm-49_mars/en/issue_2/rm-49_mars_en_2.xml Page 54 14.11.2005 13:44:58file:///C:/USERS/MODEServer/rapi/2290550/rm-49_mars/en/issue_2/rm-49_mars_en_2.xml Page 54 14.11.2005 13:44:58
To Next Page
Loading...
Need help?
General
