12
FREQUENCY
SCORE offers Multi frequency (M1/M2/M3),
where a wide range of frequencies work
simultaneously, as well as 1 single frequency
(15kHz).
You can switch between frequencies easily by short
pressing the Frequency & Noise Cancellation Button.
Noise cancellation can be performed by long pressing
the same button.
It is recommended to use Multi frequency in all modes.
When Multi frequency is selected the letter ‘’M’’ appears
on the screen. When a single frequency is selected, the
frequency is shown numerically on the screen.
Frequency only affects the mode currently selected;
changes made in one mode do not affect the others.
In areas where there is electromagnetic interference,
single frequencies may be less noisy compared to Multi
frequency. However, they will be less sensitive to many
targets at the same time.
Multi Frequency
Multi frequency which runs multiple frequencies
simultaneously gives the user the advantage of covering
a broader range of targets on all types of terrains.
In addition, it offers maximum depth for a large range of
metals with different sizes on wet salt beach sand and
underwater by minimizing ground noise.
Modes and Frequencies
Different than the Beach mode, Park and Field modes
offer 3 Multi frequencies as Multi-1 (M1), Multi-2 (M2) and
Multi-3 (M3). M1 is more sensitive to higher conductors
while the M2 detect lower conductors better.
M3 is ideal for humid, wet and/or conductive soils.
It reduces the effect of moisture in soils which can
cause falses. It also weakens the response of targets
generating 10-11 IDs such as coke and aluminum foil.
Ferrous Targets
Nails, Iron…
Low Conductive Targets
Foil, Small Gold Jewelry,
Nickels, Coke…
Medium Conductive Targets
Coins, Large Jewelry,
Small Silver...
High Frequencies provide
better results
Low Frequencies provide
better results
Simultaneous Multi Frequency provides better results for all targets
High Conductive Targets
Large Silver and
Copper Coins…
To Next Page
Loading...
