Nokta SCORE - Introduction to the Device; Device Controls Overview

3
INTRODUCTION TO THE DEVICE
1. LCD Screen
2. Power & Settings Button
To turn the device on, press the button for 3 seconds.
To enter or exit settings, press once. To turn the device
o, press and hold.
Note: While in settings, pressing the button long will not
turn the device o.
3. Pinpoint & Discrimination Button
Long pressing this button on the main screen is used
for pinpoint. Short pressing this button allows you to
switch between dierent discrimination options.
4. Frequency & Noise Cancellation Button
Short pressing this button allows you to select the
operating frequency amongst the multi and single
frequencies. Long pressing this button allows you to
noise cancel automatically.
5. Right & Left Buttons
On the main screen, they are used to navigate between
the modes and in the settings menu, they are used to
navigate through the settings.
6. Plus (+) & Minus (-) Buttons
On the main screen, they are used to increase or
decrease the sensitivity and in the settings menu, they
are used to change the value of a setting.
7. Speaker
8. LED Flashlight
9. Search Coil Input Socket
10. Wired Headphones and Charging Input Socket
IMPORTANT! If no headphones or charging cable is
plugged in the socket, please keep it closed with the
screw cap.
IMPORTANT! The higher model DOUBLE SCORE
is used throughout this manual for illustration
purposes. Some of the features and settings shown
are NOT present in the SCORE model.
1
3 24 56
7
8
9
10