27
Connecting to Audio
Bluetooth Speaker
The projector is equipped with Bluetooth that allows the user to connect their device wirelessly for audio playback.
To connect and pair your device:
1. Go to: Home > Bluetooth.
2. Use Up / Down on the remote control to select Bluetooth Speaker or Bluetooth Pairing. Then press OK .
3. A sound eect will be audible upon entering pairing mode.
4. Upon successful connection, another sound eect will be audible.
NOTE:
• Once paired, if both the projector and your device are powered on they will automatically connect via Bluetooth.
• The projector’s name will be labeled as “NOMVDIC PJ”.
• To connect the P1000 with a paired smart device, select “P1000” from the smart device’s Bluetooth settings to connect again
each time.
• If both the projector and your device are powered on they will automatically connect via Bluetooth in Bluetooth Speaker mode.
When connected please note that only the Power , Return buttons can exit Bluetooth mode.
To Next Page
Loading...
