Nomadic P1000 - Shutting down the Projector

40
Shutting Down the Projector
1. Press Power and a conrmation message will appear to prompt you to press Power a second time. Additionally you
can press any other button to cancel.
NOTE:  If you do not respond in a few seconds after the rst press, the message will disappear.
2. Disconnect the power cord from the power outlet if the projector will not be used for an extended period of time.
NOTE: 
• To protect the light source, the projector will not respond to commands during the cooling process.
• Do not unplug the power cord before the projector completely shuts down.