39
Adjusting 4 corners
You can manually adjusts the shape and size of an image that is unevenly rectangular on all sides.
1. Press OSD Menu to open the OSD menu.
2. Go to the DISPLAY > Corner Adj. menu and press OK . The Corner Adj. page is displayed.
3. Use Up / Down / Left / Right to select the corner you wish to adjust and press OK .
4. Use Left / Right to select an adjustment method that suits your need and press OK .
5. As indicated on the screen (Up / Down for a 45-degree angle adjustment and Up / Down / Left / Right for a
90-degree angle adjustment), press Up / Down / Left / Right to adjust its shape and size. You can press Return
or OSD Menu to go back to a previous step. A long press for 2 seconds on OK will reset the settings on the corner
that you chose.
NOTE:
• Adjusting keystone will reset the Corner Adj. settings.
• After the Corner Adj. settings have been modied, some aspect ratios or timings are not available. When that happens, reset the
settings on all 4 corners.
To Next Page
Loading...
