83
POWER MANAGEMENT Menu
Menu Description
Auto Power On
• Signal
Selecting Enable allows the projector to turn on automatically once the
HDMI/USB C signal is fed through the HDMI/USB C cable.
• CEC
This projector supports CEC (Consumer Electronics Control) function for
synchronized power on/o operation via HDMI connection. That is, if a
device that also supports CEC function is connected to the HDMI input
of the projector, when the projector’s power is turned o, the power of
the connected device will also be turned o automatically. When the
power of the connected device is turned on, the projector’s power will be
turned on automatically.
NOTE:
• In order to work properly, make sure that the device is correctly
connected to the HDMI input of the projector via an HDMI cable,
and its CEC function is turned on.
• Depending on the connected device, the CEC function may not
work.
• Direct Power On
Allows the projector to turn on automatically once power is fed through
the power cord.
To Next Page
Loading...
