• Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide and third blade are provided for your safety. If the
plug does not t into your outlet, obtain an adapter and do not attempt to force the plug into the
outlet.
• When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure
grounding prongs are NEVER REMOVED.
• Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the
point where it emerges from the projector.
• In some countries, the voltage is NOT stable. This projector is designed to operate safely within a
voltage between 100 to 240 volts AC, but could fail if power cuts or surges of ±10 volts occur. In
areas where voltage may uctuate or cut out, it is recommended that you connect your projector
through a power stabilizer, surge protector, or uninterruptable power supply (UPS).
• If smoke, an abnormal noise, or a strange odor is present, immediately switch the projector o and
contact your dealer or NOMVDIC™. It is dangerous to continue using the projector.
• Use only attachments/accessories specied by the manufacturer.
• Disconnect the power cord from the AC outlet if the projector is not being used for a long period
of time.
• Refer all servicing to qualied service personnel.
CAUTION: Possibly hazardous optical radiation is emitted from this product. As with any bright
light source, do not stare into the beam, RG2 IEC 62471-5:2015.
To Next Page
Loading...
