32
Symptom See
Section
See
Page
Boom(s) raise(s) when it should lower, or vice
versa
4.3.3 14
Boom(s) keep(s) raising or lowering in
MANUAL mode (creeping up or down)
4.3.4 15
Boom will not stay level or settle over a long
period of time
4.3.4 15
Boom(s) creep(s) upwards when in the
transport position
4.3.6 16
Hydraulic oil overheats 4.3.6 16
Sprayer system shuts down or alarm sounds due
to the hydraulic oil overheat
4.3.6 16
Boom Instability and Main Lift Problems
Erratic or "jumpy" boom behavior (in CROP
mode)
4.4.1 18
Bouncing boom(s) 4.4.1 18
Boom unintentionally moves all the way up in
CROP mode
4.4.2 18
Irregular boom movement or boom instability 4.4.3 18
Control panel in AUTO mode interferes with
auto steer or rate controller operation
4.4.3 b) 18
Active and Passive Roll Issues
Poor performance of Active/Passive Roll
control
4.5.1 19
Poor performance or improper action of Active
Roll control
4.5.2 19
Poor performance or improper action of Passive
Roll control
4.5.3 19
Main section tends to lower into the crop in
CROP mode
4.5.4 19
"SP NoRdg" displayed
5.2 23
"Minimum" "Override" displayed
5.2 23
"Disabled" displayed
5.2 23
To Next Page
