2
2 OPERATOR SAFETY
DANGER
STEP 1: Always ensure that the UC4 system is powered
down or in MANUAL mode:
before leaving the operator’s seat
while the machine is not moving
or when transporting the machine
STEP 2: Under no circumstances should any service work
be performed on the machinery while the UC4 system is
in the AUTOMATIC mode.
STEP 3: Before working on any part of the booms:
set the UC4 system to MANUAL mode
turn the sprayer engine off
STEP 4: Do not operate this system before:
reading and understanding the UC4 Technical
Manual
thoroughly understanding your machine operation
STEP 5: The UC4 system will greatly improve your
spraying height accuracy and protect the boom against
damage in a wide variety of field conditions. However,
under some circumstances performance may be limited.
The OPERATOR of the sprayer must remain ALERT at
all times and override the automatic control when
necessary. Refer to the warranty statement in Section 0
for more details.
To Next Page
Loading...
