1
1 INTRODUCTION
This booklet is a quick on-site reference for the operator of the UC4
automatic boom height control system.
This booklet is intended to be used in conjunction with the:
UC4 Total Control Automatic Boom Height Technical Manual
(UC4 Technical Manual)
UC4 Total Control Automatic Boom Height System Installation
Manual (UC4 Installation Manual)
It is important for the operator to be familiar with the UC4 Technical
Manual before attempting operation. As well, it is assumed that the
operator is familiar with navigating through the UC4 control panel menu
structure and with making setting adjustments.
Section 3 outlines basic operation of the UC4 control system.
Section 4 describes solutions for common symptoms regarding the UC4
system operation. Irregular behavior is sometimes a combination of several
causes. Please take time to read this section thoroughly.
Section 5 presents common error messages on the UC4 control panel’s
LCD screen.
Section 6 discusses detailed information regarding the sensor and rod
alignment. This information will be useful to operate and maintain the
system efficiently.
Section 7 is a quick reference to the common symptoms. It guides you to
find a proper solution quickly when experiencing difficulty during System
Setup or field operation.
This guide is based on UC4 software Version 5
If you can not determine the cause of your problem, contact your dealer or
NORAC for assistance.
Phone: 1-800-667-3921 Canada (Toll Free)
1-866-306-6722 United States (Toll Free)
(+33) (0)4 26 47 04 42 Europe
1-306-664-6711 all other regions
E-mail: service@norac.ca
Web Site: www.norac.ca
To Next Page
Loading...
