MITX-6922 Mini-ITX Motherboard Based on Intel QM67/QM77 Chipset
6
（2）Use jumper cap to connect JCC pins 1 and 2 for 5-6 seconds, then restore to 2-3；
（3）Press "F9" -- "enter" to reload the optimal default value；
（4）Press F10 to save and exit the settings
JCC：
Clear CMOS content and restore all BIOS
Normal working status, default settings
Do not clear CMOS when the computer is power on, otherwise, it will cause damage
to the motherboard!
To Next Page
Loading...