Norco MITX-6922 - Advanced Menu; APM Configuration

MITX-6922 Mini-ITX Motherboard Based on Intel QM67/QM77 Chipset
27
System Time
System Time Format，Hour/Minute/Second.
3.2 Advanced Menu
BIOS SETUP UTILITY
BIOS Information
Enabled or Disabled Boot Option
for Legacy Network Devices.
Launch LAN1 PXE OpROM [Disabled]
Launch LAN2 PXE OpROM [Disabled]
APM Configuration
ACPI Settings
CPU Configuration
SATA Configuration
AMT Configuration
USB Configuration
IT8783F Super IO Configuration
IT8783F H/W IO Monitor
Serial Port Console Redirection
→←：Select Screen
↑↓：Select Item
Enter：Select
+/-：Change Opt.
F1：General Help
F9：Optimized Defaults
F10：Save&Exit
ESC：Exit
Version 2.10.1208. Copyright（C）2010 American Megatrends，Inc.
Remind： Incorrect parameter value setting in the following sections may cause your system
failure, so please refer to the instructions in this manual for setting during operation！
Launch LAN1/LAN2 PXE OpROM
This item is used to set whether to load the startup code of onboard network card， Set
values : [Enabled] [Disabled].
3.2.1 APM Configuration
BIOS SETUP UTILITY