Norco MITX-6922 - ACPI Settings

MITX-6922 Mini-ITX Motherboard Based on Intel QM67/QM77 Chipset
28
RTC Power On Function [Enabled]
RTC Power On Hour 0
RTC Power On Minute 0
RTC Power On Second 0
Enable or disable System wake on
alarm event. When enabled.
System will wake on the
hr::min::sec specified
→←：Select Screen
↑↓：Select Item
Enter：Select
+/-：Change Opt.
F1：General Help
F9：Optimized Defaults
F10：Save&Exit
ESC：Exit
Version 2.10.1208. Copyright（C）2010 American Megatrends，Inc.
RTC Power on Function
Automatic power on，set value: [Enabled] [Disabled]，when Enabled，the following three
options will appear, setting the specific wake-up time and date; Default: [Disabled].
3.2.2 ACPI Settings
BIOS SETUP UTILITY
ACPI Settings
Select APCI sleep state the system
will enter when the SUSPEND
button is pressed.
ACPI Sleep State [S1 (CPU Stop Clock)]