Nord Drivesystems B 1000 - Type Plate Explanation

Gear units – Manual with installation instructions
16 B 1000 en-3921
2.2 Name plate
The name plate must be firmly attached to the gear unit and must not be subjected to permanent
soiling. Please contact the NORD service department if the name plate is illegible or damaged.
Figure 1: Name plate
Explanation
1
DataMatrix code
8
Weight
2
NORD gear unit type
9
Overall gear unit ratio
3
Modes of operation
10
Installation position
4
Year of manufacture
11
Rated speed of gear unit output shaft
5
Serial number
12
Lubricant type, viscosity and quantity
6 Rated torque of gear unit output shaft 13 Customer part number
7
Drive power
14
Operating factor