Nord Drivesystems B 1000 - 6 Disposal; Table 10: Materials

6 Disposal
B 1000 en-3921 51
6 Disposal
Observe the current local regulations. In particular, lubricants must be collected and disposed of
correctly.
Gear unit components Material
Gearwheels, shafts, roller bearings, keys, circlips, …
Steel
Gear unit housing, housing components, … Grey cast iron
Light alloy gear unit housing, light alloy housing components, …
Aluminium
Worm gears, sockets, ...
Bronze
Radial shaft seals, sealing caps, rubber components, …
Elastomers with steel
Coupling components
Plastic and steel
Flat seals Asbestos-free sealing material
Gear oil
Additive mineral oil
Synthetic gear oil (adhesive label: CLP PG)
Polyglycol-based lubricants
Synthetic gear oil (adhesive label CLP PG)
Poly-alpha-olefin based lubricants
Cooling coil, embedding material of the cooling coil, screw fittings
Copper, epoxy, yellow brass
Table 10: Materials