1 General
BU 0200 GB Subject to technical alterations 15
“Suitable For Use On A Circuit Capable Of Delivering Not More Than 5000 rms Symmetrical Amperes, 120 Volts
maximum (SK 2xxE-xxx-112), 240 Volts maximum (SK 2xxE-xxx-323) or 500 Volts maximum (SK 2xxE-xxx-340) and
when protected by RK5 class or faster fuses as indicated.”
Suitable for use with mains with a maximum short circuit current of 5,000A rms (symmetrical), 120V
maximum (SK 2xxE-xxx112), 240V maximum (SK 2xxE-xxx323), or 500V maximum (SK 2xxE-xxx340), and
with protection with a Class RK5 or faster fuse as described in Section 8.3.5.
“Suitable For Use On A Circuit Capable Of Delivering Not More Than 5000 rms Symmetrical Amperes, 120 Volts
maximum (SK 2xxE-xxx-112), 240 Volts maximum (SK 2xxE-xxx-323) or 500 Volts maximum (SK 2xxE-xxx-340) and
when protected by Circuit Breaker (inverse time trip type) in accordance with UL 489”, current and voltage ratings
according to instruction manual.”
Suitable for use with mains with a maximum short circuit current of 5,000A (symmetrical), 120V maximum
(SK 2xxE-xxx112), 240V maximum (SK 2xxE-xxx323), or 500V maximum (SK 2xxE-xxx340) and with
protection via a UL Category DIVQ circuit breaker (thermal and electromagnetic trigger) in accordance with
UL 489. For current and voltage ratings, please refer to Section 8.3.5.
NORDAC SK 200E frequency inverters include protection against motor overload. Further technical details
can be found in Section 8.3.5.
1.5.3 C-Tick labelling
NORD SK 200E series frequency inverters fulfil all the relevant regulations in
Australia in New Zealand.
1.5.4 RoHS compliance
SK 200E series frequency inverters are designed to be RoHS compliant
according to Directive 2002/95/EU.
N 23134
To Next Page
Loading...
