Nord Drivesystems Nordac SK 200E Series - Parameter Overview, I;O Extension

6 Parameterisation
BU 0200 GB Subject to technical alterations 215
6.3.2 Parameter overview, I/O extension
Setting after commissioning
Parameter
No. [Array]
Name
Factory
setting
Super
visor
BASIC PARAMETERS (Section 6.2.1)
P150 Set relays 0
P152 Factory setting 0
P153 [-01]
Min. system bus cycle time
(SDO)
10
P153 [-02]
Min. system bus cycle time
(PDO)
5
P160 Set analog output -0.1
P161 [-01] Filter time 100
P161 [-02] Filter time 100
P161 [-03] Filter time 0
P161 [-04] Filter time 2
P161 [-05] Filter time 2
P161 [-06] Filter time 2
P161 [-07] Filter time 2
P161 [-08] Filter time 0
P161 [-09] Filter time 0
P162 Send broadcast 0
P163 Inversion of Analog Out 0
INFORMATION (Section 6.2.2)
P170 ...
[-01]
Actual error 1
(actual present fault)
P170 ...
[-02]
Actual error 2
(Last fault)
P171 [-01]
Software version
(Version number)
P171 [-02]
Software version 2
(Revision number)
P171 [-03]
Software version 3
(Special version)
P172 Configuration
P173 Option status
P174 State of digital inputs
P175 State of relays
P176 [-01] Current voltage (AIN1)
P176 [-02] Current voltage (AIN2)
P176 [-03] Current voltage (AOUT)