Nordson LA 404 - Page 48

LA 404 Pattern Control System
44
Part 1037527B
! 2005 Nordson Corporation
Manual 66-LA404-MA-01
Dot Beads (contd)
$;A? ! T0@!AK!!
)6:!4=5=A?:?5K
4;:9E ! /!AA
6640022A
1. To set the size of each dot (time):
a. Press the % or & button for the cursor to appear beside numeric
value.
b. Press the " or # button to enter the desired gun-on time value from
0.1 – 50.0 ms.
2. To set the spacing between dots (pitch):
a. Press the % or & button for the cursor to appear beside numeric
value.
b. Press the " or # button to enter the desired pitch value from
3 – 9999 mm.
3. After setting Time and Pitch, press the SET UP forward button to open
the Dly/Dur setup menu screen, refer to Normal Beads.
4. Press the % or & button for the cursor to appear beside the Dly (delay).
5. Press the " or # button to set the desired delay value from
0 – 8187 mm.
6. Press the % or & button for the cursor to appear beside the Dur
(duration, also called length).
7. Press the " or # button to set the desired duration value from
0 – 8192 mm.