LA 404 Pattern Control System
4
Part 1037527B
! 2005 Nordson Corporation
Manual 66-LA404-MA-01
Installation Practices
" Install the equipment in accordance with the instructions provided in this
document and in the documentation provided with auxiliary devices.
" Ensure that the equipment is rated for the environment in which it will be
used and that the processing characteristics of the material will not
create a hazardous environment. Refer to the Material Safety Data
Sheet (MSDS) for the material.
" If the required installation configuration does not match the installation
instructions, contact your Nordson representative for assistance.
" Position the equipment for safe operation. Observe the requirements for
clearance between the equipment and other objects.
" Install lockable power disconnects to isolate the equipment and all
independently powered auxiliary devices from their power sources.
" Properly ground all equipment. Contact your local building code
enforcement agency for specific requirements.
" Ensure that fuses of the correct type and rating are installed in fused
equipment.
" Contact the authority having jurisdiction to determine the requirement for
installation permits or inspections.
Operating Practices
" Familiarize yourself with the location and operation of all safety devices
and indicators.
" Confirm that the equipment, including all safety devices (guards,
interlocks, etc.), is in good working order and that the required
environmental conditions exist.
" Use the personal protective equipment (PPE) specified for each task.
Refer to Equipment Safety Information or the material manufacturer’s
instructions and MSDS for PPE requirements.
" Do not use equipment that is malfunctioning or shows signs of a
potential malfunction.
To Next Page
Loading...
