39
IP2449EN
RO - Radio and Connectivity Operations
PARAMETER LEVEL
EP - Setting encrypted messages
SR - Remote control storage
RM - Radio receiver operation
TX - Visualization of counter show-
ing remote controls stored
MU - Setting of the maximum number
of remote controls that can be sto-
red in the memory
ER - Deletion of a single remote
control
EA - Total memory deletion
C1, C2, C3, C4 - Selection of CH1, CH2,
CH3, CH4 function of stored remote
control
FQ - Radio frequency selection
VL - enable/disable vacation mode
BT – Enabling/disabling
Bluetooth®
WF - Setting of WiFi functionality
WQ - Request to restart the con-
nected WiFi device (in particular
Apple HomeKit)
MA - Deletion of Mobile App control
permissions
DF - Diagnostic Functions
PARAMETER LEVEL
AI - Automation model ID Info
CU - Visualization of the firmware
version on the control panel
UP - Firmware update
AL - Alarm counter
UP - Alarm log
AR - Alarm reset
CV - Display of total operations
counter
CP - Display of partial operations
counter
ZP - Reset of partial operations
counter
CA - Setting the maintenance alarm
(factory setting - alarm deactiva-
ted: 0.0 00. 00)
OA - Selecting maintenance alarm
display mode
CH - Display of power supply hour
counter
BH - Visualization of counter for po-
wer supply hours via battery
SV - Saving user configuration on
control panel storage module
RC - Configuration loading
RL - Loading of last configuration
set
EU - Erasing of user configurations
and last configuration set in the
storage module
IM - Motor current visualization
BL - Visualization of Battery voltage
level
EL - Efficiency level of the automa-
tion
EN - Enable force detection test ac-
cording EN 13241-1
UB - Door unbalanced level
RD - Resetting of factory settings
To Next Page
Loading...