Feature Operations /
161
If your telephone is designated as a Prime Phone, you can use
Call Forward (No Answer), Call Forward (All Calls) or Do Not
Disturb to prevent incoming calls. When Call Forward is active, all
calls arriving at your telephone will be redirected to the specified
telephone, whether or not they have already been forwarded to
your telephone from another. Because a Prime Phone is a backup
answering telephone for various lines in your system, make sure
that you do not forward calls to a telephone at which they will
remain unanswered.
Prime Phone assignment is controlled by your Installer or Service
Representative in the “Line Data” section of Configuration
programming.
System Coordinator Guide
a..-
To Next Page
