:
-: : I -:
‘... .
: : >.:-T<
,. .x
., ;.,
:
:
Feature Operations I97
Speed Dial Access Signaling
Access sequences can also be stored in System Speed Dial codes
(01-70) or Personal Speed Dial codes (71-94). As with Autodial
buttons, Speed Dial codes can store a maximum of 16 characters.
Access codes used by many people on the system are best stored
as System Speed Dial entries. Personal Speed Dial is better for
storing codes tailored to the needs of individual office workers.
See the entries for “Speed Dial-Personal” and “Speed Dial-
System” for further information and instructions.
Accidental Disconnect Protection
This feature allows you to retain a call if you accidentally drop the
receiver back into the cradle while trying to pick it up. As long as
the receiver is picked up within one second of being dropped, the
call will remain connected.
This feature does not need to be programmed all Norstar systems
support Accidental Disconnect Protection.
To
retrieve your call:
I. Pick up the receiver.
OR
Press m
System Coordinator Guide
To Next Page
Loading...
