Nortel 1210 - Using Conferee Selectable Display

Operating your IP Phone 1210
90
Using Conferee Selectable Display
Use the Conferee Selectable Display feature to list active conferees and
to disconnect a conferee from the conference call.
Viewing active conferees
Use the following procedure to view active conferees.
2. Dial the number of the person to add to
the conference call.
You can talk to the person without
intervention from the party on hold.
3. Press the Conference key again to
connect all parties.
4. If the party you attempt to add to the
conference is unavailable, press the
Goodbye key.
The call ends.
5. Press the Handsfree key to return to
your original call.
1. During a conference call, press the
Confdsp soft key to turn on the LCD
Conf
(Goodbye)
ConfDsp