Nortel 1210 - Hotel Ppplications; Configuring Automatic Wake-Up

Operating your IP Phone 1210
95
Hotel ppplications
Hotel applications are a group of hospitality features that increase the
value of the IP Phone 1210. In a hotel environment guests can access the
following service:
• “Configuring Automatic Wake-Up” on page 95
Configuring Automatic Wake-Up
Use the Automatic Wake-Up feature to receive a timed reminder call. You
can program your IP Phone to automatically place a call at a
predetermined time. When you answer the call, prerecorded music plays
for 30 seconds followed by a prerecorded announcement or the attendant
on the line.
Entering Automatic Wake-Up call
Use the following procedure to enter Automatic Wake-Up call.
1. Lift the handset.
2. Dial the Automatic Wake-Up Request
FFC.
3. Dial the Automatic Wake-Up time in a
24-hour time format (hhmm).
You hear a tone to confirm your entered
time.
To enter the time in a 24-hour time
format, enter the hours followed by the
minutes. For example, to configure the
time to 7:30 a.m., enter 0730; to
configure it to 9:45 p.m., enter 2145.