Need help?Do you have a question about the Nortel M3902 and is the answer not in the manual?
General| Type | IP Phone |
|---|---|
| Speakerphone | Yes |
| Headset Jack | Yes |
| Power over Ethernet (PoE) | Yes |
| Lines | 2 |
| Wall Mountable | Yes |
| Protocols | SIP, H.323 |
| Supported Codecs | G.711, G.729 |
| Volume Control | Yes |
| Display | LCD |
| Buttons | Programmable |
| Power Source | PoE or AC adapter |
Allows the user to press one Feature Key to dial a specific telephone number automatically.
Procedure to make a call from your telephone using the handset, line key, handsfree, or headset.
Feature to automatically dial frequently called numbers using a one, two, or three digit code.
How to store and make Speed Calls for M3903 and M3904 models using codes.
Procedure to put a current call on hold and retrieve it later.
Procedure to transfer a call to a third party using the Transfer feature on M3902.
Procedure to transfer a call to a third party using Swap and Connect keys on M3903/M3904.
Feature to put a current call on hold to answer an incoming call and return to the first call.
Procedure to set up a conference call for up to six people on M3902 phones.
Procedure to access the personalized directory of names and telephone numbers.
How to add a new name and telephone number entry to the Personal Directory.
How to copy an incoming call entry from the Call Log to the Personal Directory.
Procedure to delete or edit existing entries in the Personal Directory.
How to use the Personal Directory to search for and dial a contact.
How to search for a specific entry within the Personal Directory.
To Next Page
