Operating your IP Phone 1210
93
Answering a group call
Use the following procedure to answer a group call.
Ending a group call
Use the following procedure to end a group call.
1. Lift the handset.
Note the following about notification
tones:
— If you are on a call and receive three
10-second tones, this is the
notification of a group call on your IP
Phone.
— If you are on a call on another line
when a group call is made, you
receive a long tone through the
handset or speaker.
— If you are already on a conference
call or another group call, you do not
receive notification of a group call.
1. Press the Goodbye key.
Note: When the person who made the
group call disconnects, the call
terminates for all members of the group.
However, the members of the group call
can disconnect from the call and not
affect other members on the call.
(Goodbye)
To Next Page
