18
CHAPTER
3
Installation Unpacking and Inspecting
SR1001 Installation Guide
Version 8.3.5
Rack-Mounting Option
An optional rack-mounting tray is available for installing two SR1001 or 1001Ss in an
equipment rack. The following items are shipped in a separate carton:
Figure 11 Rack-Mount Components
Rack Tray
(2) Rack Carriage Assemblies
2) Mounting Brackets
(4) Velcro Tie Wraps
(2 sets) Velcro Mounting Pads
4) 10-24 x .5 Phillips Pan
Head Screws for
Equipment Rack
(4) 10-24 x .5 Phillips Pan
Head Screws for
Equipment Rack
(6) 6-32 x .25 Phillips Flat
Head Mounting Bracket
Screws
4) 4-40 x .25 Phillips Pan
Head Rack Carriage Screws
To Next Page
