34
CHAPTER
4
Configuration Installing the Software License Key
SR1001 Installation Guide
Version 8.3.5
Installing the Software License Key
A software key is required to enable the SR1001 for advanced features (such as IPSec
VPN)
. To obtain a software license upgrade key, contact your reseller or Nortel. You will be
asked to provide the serial number and model number. This key is different than the port
activation key.
To install the software licence key to enable advanced VPN on the SR1001, issue the
following command:
SR> system licenses advance_vpn
You will be prompted to enter the advance_vpn licence key that you received from Nortel.
Switching Routing/IPMUX Modes
The SR1001 supports only dynamic routing mode.
To Next Page
