1001 Serial
1001S Front Panel
The router front panel houses the Secure Router LEDs.
Figure 3 1001 Router Front Panel
1001S Back Panel
The 1001 router back panel provides connections for one WAN port, two 10/100 Base-T
Ethernet ports, one AUX port, one Console port, and a 12 VDC power input jack.
Figure 4 1001 Router Back Panel
The 1001 front-panel LEDs indicate real-time unit status. Table 6 provides information about
how to interpret the LED states.
Table 6 LED and Port Descriptions
Port Description Color
Backup LED Indicates traffic activity
on this interface
Green = normal activity
Red = alarm state
Yellow = test mode
WAN STATUS Indicates traffic activity
on this interface
Green = normal activity
Red = alarm state
Yellow = test mode
ETHERNET 0 / 1
LINK/ACT Indicates traffic activity
on this interface
Green = link is operational
Blinking Yellow = either receiving or sending
traffic
Red = packet collisions
HS Indicates traffic speed
on the interface
Off = 10 Mbps
Green = 100 Mbps
To Next Page
