Nortel SR1001 - Pinouts: V.35 Connector (DCE)

NOTE: The serial DCE and DTE cables for V.35 are equivalent to Cisco Systems smart cables.
Table 31 Pinouts: V.35 Connector (DCE)
Pin Signal Direction
17 RD- —>
18 RD+ —>
19 SCT- —>
20 SCT+ —>
21 SCR- —>
22 SCR+ —>
25 SCTE- <—
26 SCTE+ <—
27 SD- <—
28 SD+ <—
33 LL <—
34 DTR <—
35 RTS <—
42 CTS —>
43 DSR —>
44 RLSD —>
45 ground
46 shield ground
48 ground
49 mode 1
50 mode 0
51 ground
53 TxC/NIL
54 RxC_TxCE
55 RxD/TxD
56 ground
Unreferenced pins are not connected.