Nortel SR1001 - Page 58

46 CHAPTER 4
Configuration Routing Configuration
SR1001 Installation Guide
Version 8.3.5
BGP4
Configuring EBGP between two different autonomous systems.
Router/configure> interface bundle Chicago
Router/configure/interface/bundle Chicago> link ct3 1 1-10
Router/configure/interface/bundle Chicago> encapsulation ppp
Router/configure/interface/bundle Chicago> ip address 20.20.20.1 24
Router/configure/interface/bundle Chicago> exit
Router/configure> router bgp 10
Router/configure/router/bgp 10> neighbor 20.20.20.2 20
Router/configure/router/bgp 10/neighbor 20.20.20.2 20> exit 3
Configuring IBGP between two neighbors in the same autonomous system.
Router/configure> interface ethernet 0
Router/configure/interface/ethernet 0> ip address 10.10.10.1 24
Router/configure/interface/ethernet 0> exit
Router/configure> router bgp 10
Router/configure/router/bgp 10> neighbor 10.10.10.2 10
Router/configure/router/bgp 10/neighbor 10.10.10.2 10> exit 3
Redistributing static and connected routes.
Router/configure> ip route 9.9.0.0 255.255.0.0 10.10.10.10
Router/configure> router bgp 10
Router/configure/router/bgp 10> redistribute static
Router/configure/router/bgp 10> redistribute connected
Router/configure/router/bgp 10> exit 2