Page 14
INERTIA-2464
Technical & Programming Manual
Copyright (c) 1996,
INERTIA FIRE SYSTEMS
INSTRUCTIONS TO OPERATORS
SUGGESTED ALARM PROCEDURE
The following is a suggested alarm procedure for use by building fire officers or duty wardens. The fire
indicator panel is designed for use by qualified fire fighters and it is strongly recommended that the fire panel
not be operated in an emergency situation by other than suitably qualified fire fighters.
•
Do not open fire indicator panel door or press any buttons until fire officers arrives.
•
Determine location of the fire.
•
Visually inspect area at a safe distance for actual fire or false alarm.
•
Notify fire-monitoring station of either result.
•
Perform evacuation and extinguishing operations as required.
•
IF a FIRE, direct fire fighters to the fire indicator panel and cause of alarm as they arrive.
•
IF a FALSE ALARM, advise maintenance technicians to determine and rectify cause.
•
Record all events in logbook.
NOTE A suitably qualified fire officer should perform the above procedure. These are suggested procedures
only, and if specific fire procedures are available or issued, they MUST prevail.
To Next Page
Loading...
