8 PN 15037:D2 9/9/02
• Internal nonvolatile clock.
• AM2020/AFP1010 “vectored” printer capability.
• System 5000/System 500 panel mount option.
System 5000/System 500 Note: The LCD-80 does not display the
“ON” status of output circuits and relays.
AM2020/AFP1010 Note: Security points must have “Security” as part
of its custom label on the LCD-80 to differentiate between a fire alarm
and a security alarm condition.
Note: The LCD-80 should not be used as a primary display in Canada.
1.3 TERMINAL Mode
In Terminal Mode, the LCD-80 is a simplified version of the display
for AFP-200, AFP-300, AFP-400, AFC-600, AM2020/AFP-1010,
NCA, and NFS-640 (but does not support a remote printer). Up to 32
of these terminals can provide annunciation and control from remote
locations.
• Device type identifiers from control panel.
• Device & zone custom alpha labels from control panel.
• Time/date and Device address from control panel.
• Operates in addition to control panel CRT if desired.
• EIA-485 connects to control panel terminal port (requires CCM-
1 only with DIA-1).
• No programming necessary — uses time and labels from the
control panel.
Note: LCD-80 terminal mode is not supported by System 500 or
System 5000.
To Next Page
Loading...
Need help?
General
