Need help?Do you have a question about the Notifier LCD-80 and is the answer not in the manual?
General| Power | 24 VDC |
|---|---|
| Compatibility | Notifier series |
| Display | LCD |
| Mounting | Wall mountable |
| Display Type | LCD |
Lists general characteristics and capabilities of the LCD-80 unit.
Describes the LCD-80's functionality as an alphanumeric annunciator.
Explains the LCD-80's function as a simplified display interface.
Configuration steps for assigning a unique address to the LCD-80.
Guidelines for connecting a remote printer to the LCD-80.
Specifies the required settings for the PRN remote printer.
Details on how to supply power to the LCD-80 unit.
Explains the operational aspects and switch functions in ACS mode.
Describes various screen displays for different system states.
Details the EIA-485 communication interface for the LCD-80.
Details the EIA-232 serial interface for printers and programming.
Provides an overview of programming the LCD-80 in ACS Mode.
Steps for programming via CRT display.
How to configure the CRT for programming tasks.
Steps for programming via an IBM-compatible computer.
Information on default messages and how to restore them.
Instructions for entering custom messages for display.
Instructions for entering custom point labels for display.
Describes display patterns specific to Terminal Mode operation.
Details the function of each switch in Terminal Mode.
Outlines requirements for EIA-485 wiring in Terminal Mode.
Procedures for terminating EIA-485 shields in ACS Mode.
Procedures for terminating EIA-485 shields in Terminal Mode.
Details annunciation configuration for Address 1.
Details annunciation configuration for Address 2.
Details annunciation configuration for Address 3.
Details annunciation configuration for Address 4.
To Next Page
