LFO1 Unipolar – sets whether the LFO modulates in a positive and negative direction (set to OFF) or just
in a positive direction (set to ON)
LFO1 Common – allows the LFO applied to each of the eight voices to be phase locked, creating a more
unnatural sound. Note that with this set to ON, the Keysync page will have no effect. Instead, the Synth
Global Sync option in the Synth Global Menu will override it
LFO1 One-Shot – makes the LFO cycle through its waveform only once and then stop, when set to ON
LFO2 Velocity – sets the amount that velocity controls LFO2. Setting a positive value makes LFO2 increase
with velocity, whereas setting a negative value has the opposite effect. Increase the value to increase the effect
LFO2 MonoDelTrig – allows a different LFO effect to be applied when in either Monophonic mode. For
example, if wanting a delayed vibrato only on the first note of a musical phrase, set this to SGL (single).
However, if wanting a delay on every note, set this to MLT (multi)
…and the same as the remainder of options for LFO1.
To Next Page
Loading...
